Wooden Black Marble Slabs, Tiles and Custom-Cut Stone
Key Project Highlights
- Material: Natural marble selected for architectural and furniture applications.
- Colour: Black, charcoal and graphite tones with silver-grey linear movement.
- Pattern: Directional wood-grain bands with natural variation between slabs.
- Standard Thickness: 18mm or 20mm.
- Customisation: Other thicknesses, dimensions and fabricated components are available on request.
- Applications: Floors, walls, vanities, tabletops, kitchen islands, stairs and decorative features.
- Minimum Order: 1 piece for samples, replacements or small custom requirements.
- Lead Time: Approximately four weeks under normal production conditions.
- Packing: Tiles and fabricated pieces are protected in reinforced export wooden crates.
Product Overview
Wooden Black Marble is designed for projects that need a dark natural surface with more movement than conventional plain black stone. Closely spaced linear veins travel across the material in layered waves, producing an appearance comparable to folded timber grain, flowing fabric or geological strata. Depending on the selected block and cutting direction, the pattern may appear relatively straight, gently curved or dramatically folded.
The combination of a deep background and lighter linear veining makes this marble suitable for both large architectural surfaces and smaller statement elements. Designers can use the material across a complete floor or wall, or introduce it selectively through a vanity, dining table, reception counter or kitchen island. Its directional character also supports book-matched, vein-matched and sequential layouts when suitable slabs are selected and planned before fabrication.
Because Wooden Black Marble is a natural material, colour balance, vein density, mineral marks and small structural features vary from slab to slab. These differences are part of its authentic appearance. Show Stone can provide current slab photographs, dimensions and available quantities so buyers can review the actual batch before confirming an order. For projects requiring several adjoining pieces, early layout planning helps maintain visual continuity.
Technical Specifications
| Item | Specification |
|---|---|
| Product Name | Wooden Black Marble |
| Material Type | Natural Marble |
| Colour Range | Black, charcoal and graphite with silver-grey or pale linear veins |
| Standard Thickness | 18mm or 20mm; other thicknesses available on request |
| Size | Custom slabs, tiles and cut-to-size dimensions |
| Available Formats | Slabs, tiles, wall panels, stair components, vanity tops, tabletops and fabricated pieces |
| Finish Options | Polished, honed and selected custom finishes, subject to sample approval |
| Applications | Floors, walls, stairs, vanities, tabletops, kitchen islands and decorative features |
| Minimum Order | 1 piece |
| Normal Lead Time | Approximately four weeks after order and drawing confirmation |
| Packing | Tiles and fabricated pieces packed in reinforced export wooden crates |
Where It Performs in Real-World Applications
Floors and Feature Areas
The directional pattern can give entrance halls, boutiques, hotel spaces and private interiors a strong sense of movement. Tile orientation should be planned before installation because changing the direction of adjacent pieces can create very different visual effects. Dry laying and numbering the pieces are recommended for layouts where vein continuity is important.
Wall Cladding
Large wall panels allow the layered veins to remain visible across a broader surface. Wooden Black Marble can be used behind reception desks, in lift lobbies, around fireplaces or as a feature wall in residential and hospitality interiors. Book-matched or vein-matched arrangements may be developed when the selected slabs and project dimensions support the layout.
Tables, Vanities and Kitchen Islands
Polished dark marble provides a strong focal point for dining tables, coffee tables, vanity tops and islands. The edges can be fabricated with straight, mitred, laminated or selected decorative profiles according to the approved shop drawing. For sinks, cooktops and other cut-outs, adequate support and professional fabrication are essential.
Stairs and Custom Components
Directional veins can be coordinated across stair treads, risers and landings to create a continuous architectural feature. The required finish, edge detail, substrate and slip-management strategy should be assessed for the specific location. High-traffic commercial projects may require project-specific testing and maintenance planning.
What Makes This Product Different in Performance
The main distinction of Wooden Black Marble is its ability to combine a dark colour palette with pronounced directional movement. This gives specifiers more design flexibility than a uniformly black material. Straight-cut pieces can reinforce long architectural lines, while carefully selected curved or folded veins can become focal elements in furniture and feature-wall applications.
As a natural marble, the product should be specified with appropriate expectations regarding care, sealing and surface patina. It is not an engineered material, so individual slabs will not repeat exactly. Reviewing the actual slabs and agreeing on an acceptable variation range before cutting reduces uncertainty during installation.
Compliance & Industry Standards
Production dimensions and tolerances can be prepared according to confirmed project drawings, purchase specifications and mutually accepted quality requirements. Available inspection records, packing details and material information can be discussed before order confirmation. Where a project requires specific laboratory testing, slip ratings, stone classification or local compliance documentation, buyers should provide the applicable standard during the quotation stage.
Natural stone performance depends on the selected batch, finish, thickness, fabrication details, substrate and installation system. Architects, contractors and installers should verify that the proposed specification complies with the regulations and technical requirements of the destination market.
Why Global Buyers Choose Show Stone
- Material Review: Current slab images and available dimensions can be supplied before production.
- Custom Fabrication: Cutting, edge processing, sink openings and coordinated components can be produced from approved drawings.
- Layout Support: Slab selection and preliminary vein-layout communication are available for suitable projects.
- Flexible Quantity: An MOQ of one piece supports samples, replacements and small bespoke orders.
- Quality Control: Dimensions, visible surfaces, edge details and quantities are checked during production.
- Export Packing: Finished components are protected and secured in reinforced wooden crates for international transport.
- Project Communication: Drawings, specifications and packing requirements are reviewed before fabrication begins.
Lead Time & Customisation
The normal production lead time is approximately four weeks. The final schedule depends on material availability, order quantity, finish, edge profile, drawing complexity and required inspection arrangements. Buyers should allow additional time for drawing approval, slab selection and international transport.
Custom sizes can be produced for floors, walls, staircases, vanities, tables, islands and other fabricated elements. Standard thicknesses are 18mm and 20mm, while alternative thicknesses may be cut or laminated according to the design and structural requirements. Final dimensions should be confirmed through approved drawings before production.
Installation & Maintenance
Installation should be completed by experienced natural-stone professionals using a compatible substrate, adhesive, grout and support system. All components should be inspected and dry laid before permanent installation. Direction arrows and piece numbers should be retained until the layout has been confirmed.
Use pH-neutral stone cleaners for routine care and remove spills promptly. Avoid acidic products, abrasive powders and aggressive household chemicals. A suitable natural-stone sealer may be recommended depending on the finish and application. Sealers do not make marble completely stain-proof, so regular cleaning and periodic professional assessment remain important.
Countertops and tables should be protected from direct heat, sharp impacts and prolonged exposure to strongly coloured liquids. Trivets, coasters and cutting boards help maintain the finished surface. Small signs of wear may develop over time and form part of the natural patina of marble.
Frequently Asked Questions
What is Wooden Black Marble?
It is a natural dark marble featuring black, charcoal and silver-grey linear veins that resemble layered wood grain. Each slab has a unique pattern and tonal balance.
What thicknesses are available?
The standard options are 18mm and 20mm. Other thicknesses may be prepared on request, subject to material availability and fabrication requirements.
Can it be cut to custom dimensions?
Yes. Show Stone can supply slabs, tiles, panels, stair components, vanity tops, tabletops and other cut-to-size pieces based on approved drawings.
Is it suitable for floors and walls?
Yes, it can be used for interior floors and wall cladding when the thickness, finish, substrate and installation system are appropriate for the project.
Can it be used for kitchen islands and tables?
Yes. It is frequently specified for statement islands, dining tables, coffee tables and vanity units. Proper support, sealing and routine natural-stone care are required.
Can the veins be matched between pieces?
Vein matching or book matching may be possible when suitable consecutive slabs are available. The proposed layout should be reviewed before cutting begins.
Will every slab look identical?
No. Natural variations in colour, vein direction, mineral features and pattern density should be expected. Current slab photographs can be reviewed before order confirmation.
What is the minimum order quantity?
The minimum order is one piece, making the material available for samples, replacement components and small custom projects as well as larger orders.
What is the normal production lead time?
The normal lead time is approximately four weeks after the order details, drawings and material selection have been confirmed.
How is the material packed for export?
Tiles and fabricated pieces are separated, protected and secured in reinforced export wooden crates. The packing method may be adjusted according to the dimensions and quantity of the order.
